Elley New Material Co., Ltd

Showing 11 - 20 of 30, total 3 pages [First] [Previous] [Next] [Last]

sanding mesh
Specification: mesh 5*5
Detail: Sanding mesh It is cut by puncher from reinforcing net fiberglass cloth for grinding wheel. The cloth was coated with phenolic resin epoxy resin, then was baked. Our products are devided into two big types. One type is net co...

carbon fiber yarn
Specification: 3k
Detail: Carbon fiber yarn 1.Introducing Carbon fiber yarn is new reinforcement fiber, including both carbon feature and fiber limpness or machinability. It is crystallite graphite material after GF organic fiber carbonizing and grap...

vacuum bagging film
Specification: 65gsm
Detail: Vacuum bagging film It is made of 5 layers of PA and PE after common extruding. It is including Nylon content 60-70%, high breaking strength, ductility and good consistency, toughness. Technicals: Mixing: PA 60-7...

ptfe adhesive tape
Specification: 0.13,0.18,0.25mm
Detail: PTFE adhesive tape We selected fine imported fiberglass, wove it as the basic cloth and coat it with PTFE resin, proceed under high temperature condition, the product is called PTFE adhesive tape. Thickness(mm) width(mm) len...

basalt fiber fabric
Specification: 200,300g
Detail: Basalt fiber fabric 1. usage, feature It is kind of high performance engineering material with various unique properties. The fabric is up of basalt fiber by woven unidirectional, plain weaving or twill weaving style, includ...

low dielectric loss glass fiber
Specification: 210gsm
Detail: Low dielectric loss glass fiber Low dielectric names D glass fiber, have D3, Dk series. It is low density, low dielectric constant and low dielectric loss. It is an ideal reinforcement for making light weight and high perform...

hollow high strength glass fiber
Specification: 1.78-2.1g/cm3
Detail: Hollow high strength glass fiber It is new reinforcement material. It is high strength, light weight 20-30% lighter than solid glass fiber, high rigidity, low dielectric constant, low thermal conductivity, better in thermal i...

high elastic modulus glass fiber
Specification: 100,150,200gsm
Detail: High elastic modulus glass fiber It is named M glass fiber also. It is high elastic modulus. Modulus is higher 20-30% than e-glass, tensile strength is higher 20-40% than e-glass. M glass fiber properties Typical M glass S...

high silica fiber
Specification: 240,520,600gsm
Detail: High silica fiber 1. introduction High silica fiber is heat-resist and soft material which is made of more than 96% SiO2. it is good temperature and corrosion resistant, insulation, dielectric properties, long time working i...

fiberglass backing pads
Specification: 2.4-3.5mm
Detail: Fiberglass backing pads It is adopted of multi-Layer stack of compression molding in the mold after curing by heating. It is the base material of flap discs with the feature of light weight ,high strength good adhesive prop...


Showing 11 - 20 of 30, total 3 pages [First] [Previous] [Next] [Last]
1 2 3